Linksys CIT300 Quick Installation Manual

®
A Division of Cisco Systems, Inc.
Package Contents
• Handset
• 2 NiMH Batteries
• Charger with Power Adapter
• USB Base Station with USB Cable
• Power Adapter
• RJ-11 Cable (US and UK only)
• Quick Installation
• Setup Wizard CD with Skype Software
Dual-Mode
Internet Telephony Kit
Quick Installation
Voice
Model No. CIT300
Model No.
1
Installing the Telephony Kit
A
To begin, insert the Setup
Wizard CD-ROM into the
CD-ROM drive of your PC.
The Setup Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click
Start. Click Run. In the field
provided, enter
D:\SetupWizard.exe (if "D" is
B
the letter of your CD-ROM
drive).
B
Select your preferred
language. Then click Next.
C
Click Click Here to Start.
D
After reading the License
Agreement, click I accept
the agreement. Then click
Next.
C
D
E
Connect the USB cable of
the USB base station to a
USB port on your PC.
Connect the included
power adapter to the power
port of the USB base station.
Plug the power adapter into
an electrical outlet.
E
If you have a landline,
connect a RJ-11 telephone
cable (included) to the LINE
port of the USB base station.
Then connect the other end
to your telephone wall jack.
Click Next.
F
Remove the cover of the
battery compartment.
Insert the two NiMH
rechargeable, AAA batteries
(included).
Slide the cover upward until
it snaps into place.
F
Place the handset on the
charger.
Plug the charger's power
NOTE:
For the initial charge, allow
adapter into an electrical
the batteries to charge for at least
outlet.
14 hours.
Click Next.
G
The following screen
displays the various keys of
the handset. Click Next.
H
Before you use the
Telephony Kit, make sure
you have the following:
• high-speed Internet
connection
• Skype application
G
already installed on
• your PC (also included
on the CD)
• Skype account (you can
sign up for a Skype
account after you have
installed the Skype
application)
• fully charged handset
Click Next.
H
I
Click Check Audio.
I