Connecting Probes; Introduction To Connecting Probes - GE VIVID S60N Basic Service Manual

P R E L I M I N A R Y
D FR091521, R
IRECTION
3-5-6

Connecting Probes

3-5-6-1

Introduction to Connecting Probes

Probes can be connected at any time, whether the Vivid™ S60/Vivid™ S70 is On or Off.
The Vivid™ S60/Vivid™ S70 has three DLP connectors, one RS connector and a pencil probe port.
NOTE: The RS connector is compatible only with 6Tc-RS and 9T-RS probes.
1. DLP Connectors
2. RS Connector
3. Pencil Probe Connector
Figure 3-20 Probe Connectors on Vivid S60N/Vivid S70N Front Panel
Probes can be connected or changed any time, as described below, regardless of whether the system
is powered ON or OFF.
HANDLE THE PROBE GENTLY WHILE CONNECTING AND DISCONNECTING.
CAUTION
DO NOT TOUCH THE PATIENT AND ANY OF THE CONNECTORS ON THE ULTRASOUND UNIT
SIMULTANEOUSLY, INCLUDING ULTRASOUND PROBE CONNECTORS.
3-22
1
EVISION
Section 3-5 - Completing the Setup
V S60N/V S70N
IVID IVID
B S M
ASIC ERVICE ANUAL