GE VIVID S60N Basic Service Manual page 286

P R E L I M I N A R Y
D FR091521, R
IRECTION
3.) With one hand, tilt the Keyboard Assembly forward until the trackball falls out into the other hand.
4.) Carefully turn the Keyboard Assembly over (upside-down).
5.) Remove the Keyboard Bottom Cover:
•
6.) Disconnect the 2 flex cables -
7.) Remove each of the 3 hex nuts (5.5 mm) from the Trackball Board and housing -
8.) Lift the Trackball Board and Housing assembly up and remove -
8-56 Section 8-3 - Control Console Components - Replacement Procedures
1
EVISION
Figure 8-64 Removing the Mechanical Trackball
Alphanumeric Keyboard Removal Procedure on page 8 - 51
Figure 8-65 Trackball Board and Housing Removal
V
IVID
Figure 8-65, left.
S60N/V S70N B
IVID ASIC
Figure 8-66.
S M
ERVICE ANUAL
Figure 8-65, right.