Specifications; Intended Use - Makita DGP180 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Rated voltage
Grease capacity Cartridge
(with A-type
Bulk
barrel)
Grease capacity Cartridge
(with B-type
Bulk
barrel)
Maximum operating pressure
Maximum flow Slow speed mode
rate
Auto speed mode
Applicable grease type
Hose length
Overall length With A-type barrel
With B-type barrel
Net weight
NOTE: The barrel type (A-type or B-type) varies depending on the country.
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DGP180
D.C. 18 V
410 g
455 g
450 g
570 g
69 MPa
145 ml/min
290 ml/min
NLGI No.0 - No.2
1,200 mm
411 mm
449 mm
4.8 - 6.1 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

This tool is intended for dispensing grease.
7 ENGLISH
DC18SH