Placing A Three-Way Conference Call - Cisco SPA92X User Manual

Using Basic Phone Functions

Placing a Three-Way Conference Call

STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Placing a Three-Way Conference Call
STEP 1
STEP 2
STEP 3
Cisco Small Business IP Phone SPA9XX User Guide
You or another person must then "unpark" the call.
To unpark a call, you can either use the Unpark button (if you know the park line
number), or view a list of parked calls and unpark it from the list.
To unpark if you know the park line number:
Press the Unpark button.
Enter the number identifier of the park line (for example, the number that was
entered in Step 2 of "parking a call.")
Press Dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
Press the Setup button.
Select Call Park Status.
Choose the parked call you want to retrieve and press Unpark.
To initiate a conference call:
Press the Conf button during an active call. The first call is placed on hold, a
second line is opened., and you hear a dial tone.
Dial the second person's telephone number.
Press the Conf button again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected.
3
51