Turning Call Waiting On And Off - Cisco SPA92X User Manual

Using Basic Phone Functions

Turning Call Waiting On and Off

Turning Call Waiting On and Off
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business IP Phone SPA9XX User Guide
c. Press OK.
d. Press Save.
To turn off Do Not Disturb, either:
•
Press the Clr DND button; or
•
Press the Setup button and select Preferences. Then:
a. Scroll to highlight Do Not Disturb.
b. Press the Y/N button to choose No.
c. Press OK.
d. Press Save.
Call waiting alerts you when you are on a call with a status message and ringing
that another call is incoming. If you turn call waiting off, incoming calls do not ring
your phone if you are on another call, and the caller hears a busy signal or
message. You can also turn call waiting on and off from your PC using the IP Phone
Web Interface. See the
Press the Setup button.
Select Preferences.
Choose Call Waiting and press Edit.
Press the Y/N button to turn call waiting on or off.
Press OK.
Press Save.
"Configuring Call Waiting" section on page
3
76.
49