Install The Firmware - Cisco SPA92X User Manual

Installing Your Phone
Upgrading Your Phone's Firmware
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco Small Business IP Phone SPA9XX User Guide

Install the Firmware

Extract the firmware onto your PC.
Run the executable file for the firmware upgrade (for example, double click upg-
spa942-5-2-8.exe).
Click Continue after reading the message regarding upgrading and your service
provider.
Enter the IP address of your phone.
Click OK. The system displays information about your phone's current software
and hardware.
Click Upgrade to begin the upgrade.
Click OK to dismiss the status message of the upgrade.
NOTE: If you are in a VPN connection, you
may need to disconnect before proceeding so
that your PC can communicate directly with
your phone for the upgrade.
NOTE: Do not disconnect your phone's power
until the upgrade is complete (the lights on your
phone are no longer blinking).
2
23