Logging In To The Web Interface; Setting Do Not Disturb - Cisco SPA92X User Manual

Using the Web Interface

Logging in to the Web Interface

Logging in to the Web Interface
STEP 1
STEP 2
STEP 3
STEP 4

Setting Do Not Disturb

STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business IP Phone SPA9XX User Guide
Obtain the IP address of your phone by pressing the Setup button and selecting
Network. Note the Current IP address.
On your PC, open Internet Explorer.
Enter the IP address in the browser's toolbar.
The Info page of the IP Phone Web Interface displays.
The web interface has several different tabs. The tabs that allow you to configure
options on your phone are the Phone and User tabs. Click the tab names to switch
between these tabs.
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
To set Do Not Disturb:
Log in to the web interface.
In the User tab, under Supplementary Services, locate the Do Not Disturb field.
Choose Yes to turn on Do Not Disturb.
At the bottom of the page, click Submit All Changes.
NOTE: You can turn off Do Not Disturb from
your phone or from the web interface.
5
75