Before You Begin; Connecting The Handset - Cisco SPA92X User Manual

Cisco systems ip phone user manual

Hide thumbs Also See for SPA92X:

Table of Contents

Installing Your Phone

Before You Begin

STEP 1

STEP 2

Cisco Small Business IP Phone SPA9XX User Guide

Before you install and connect your phone, verify with your System Administrator

(if applicable) that the network is ready for the phone, read the safety notices, and

make sure you have all the phone parts and documentation available.

Find the end of the coiled phone cord that has the longer straightened end. Plug

that end into the back of the phone base in the slot marked with a phone symbol.

This port is labeled #5 on the

Plug in the short straightened end of the handset cord into the jack at the bottom

of the handset (not shown).

NOTE: The RJ-11 port marked "AUX" is

reserved for connection with the SPA932

Attendant Console that works with the SPA962.

It is not for use as a telephone line port.

CAUTION: Do not plug a telephone line cord

into the port marked "AUX."

Cisco SPA IP Phone Connections

graphic.

Table of Contents

Show Quick Links

Table of Contents