Note
Before You Begin
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the
Cisco Unified IP Phone on an IP telephony network:
Before You Begin, page 3-1
•
Installing the Cisco Unified IP Phone, page 3-6
•
Mounting the Phone to the Wall, page 3-9
•
Verifying the Phone Startup Process, page 3-10
•
Configuring Startup Network Settings, page 3-11
•
Before you install a Cisco Unified IP Phone, you must make some critical
decisions about how to configure the phone in your network. You can then safely
install the phone and verify its functionality. For information on preparing to
install, see
Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your
Network."
Before installing the Cisco Unified IP Phone, review the requirements in these
sections:
Network Requirements, page 3-2
•
Cisco Unified CallManager Configuration, page 3-2
•
Network and Access Ports, page 3-3
•
C H A P T E R
3
3-1