Cisco ONS 15454 SDH User Manual page 7

Chapter 15 Performance Monitoring
15.4.2 E3-12 Card Performance Monitoring Parameters
Figure 15-3
Figure 15-4
parameters for the E3-12 card.
Figure 15-3 Monitored Signal Types for the E3-12 Card
ONS 15454
Figure 15-4 PM Read Points on the E3-12 Card
ONS 15454 SDH
The PM parameters for the E3-12 card are described in
page
April 2008
shows the signal types that support near-end and far-end PM parameters for the E3-12 card.
shows where overhead bytes detected on the ASICs produce performance monitoring
Near End
E3 Signal
SDH
E3 STM16
E3 Path Near End PMs Supported
VC3 Low-Order Path PMs Supported for Near and Far-End
VC4 High-Order Path PMs Supported for Near and Far-End
LIU
CV-L
ES-L
SES-L
LOSS-L
P-ES
P-SES
P-UAS
P-ESR
P-SESR
PMs read on LIU
15-9.
15.4.2 E3-12 Card Performance Monitoring Parameters
Fiber
STM16
E3 Card
Mux/Demux ASIC
E3 Side SDH Side
LP-EB
LP-BBE
LP-ES
Low-
LP-SES
Order
LP-UAS
Path
LP-ESR
Level
LP-SESR
LP-BBER
HP-EB
HP-BBE
HP-ES
High-
HP-SES
Order
HP-UAS
Path
HP-ESR
Level
HP-SESR
HP-BBER
PMs read on Mux/Demux ASIC
Table 15-5 on page 15-8
Cisco ONS 15454 SDH Reference Manual, R4.6
Far End
E3 Signal
ONS 15454
SDH
E3
Cross-Connect
Card
BTC
ASIC
through Table 15-8 on
STM-N
15-7