Cisco ONS 15454 SDH User Manual page 16

15.5.2 G-Series Ethernet Card Performance Monitoring Parameters
Table 15-16 MaxBaseRate for STS Circuits
STS
STS-1
STS-3c
STS-6c
STS-12c
Line utilization numbers express the average of ingress and egress traffic as a percentage of capacity.
Note
The E-Series Ethernet card is a Layer 2 device or switch and supports Trunk Utilization statistics. The
Note
Trunk Utilization statistics are similar to the Line Utilization statistics, but shows the percentage of
circuit bandwidth used rather than the percentage of line bandwidth used. The Trunk Utilization statistics
are accessed via the card view Maintenance tab.
15.5.1.3 E-Series Ethernet History Window
The Ethernet History window lists past Ethernet statistics for the previous time intervals. Depending on
the selected time interval, the History window displays the statistics for each port for the number of
previous time intervals as shown in
page
Table 15-17 Ethernet History Statistics per Time Interval
Time Interval
1 minute
15 minutes
1 hour
1 day (24 hours)
15.5.2 G-Series Ethernet Card Performance Monitoring Parameters
CTC provides Ethernet performance information, including line-level parameters, port bandwidth
consumption, and historical Ethernet statistics. The G-Series Ethernet performance information is
divided into the Statistics, Utilization, and History tabbed windows within the card view Performance
tab window. The following sections describe PM parameters provided for the G1000-4 and G1K-4
Ethernet cards.
Cisco ONS 15454 SDH Reference Manual, R4.6
15-16
maxBaseRate
51840000
155000000
311000000
622000000
15-14.
Number of Intervals Displayed
60 previous time intervals
32 previous time intervals
24 previous time intervals
7 previous time intervals
Table 15-17. The listed parameters are defined in
Chapter 15 Performance Monitoring
Table 15-15 on
April 2008