Cisco ONS 15454 SDH User Manual page 60

15.8.6 Optical Service Channel Card Performance Monitoring Parameters
15.8.6 Optical Service Channel Card Performance Monitoring Parameters
Figure 15-20
parameters for the OSCM and OSC-CSM cards.
Figure 15-20 PM Read Points on OSCM and OSC-CSM Cards
ONS SDH Node
(STM-1)
The PM parameters for the OSCM and OSC-CSM cards are described in
Table 15-76 on page
Table 15-74 Optical Line PMs for OSCM and OSC-CSM Cards
Parameter
Optical Pwr (Min)
Optical Pwr (Avg)
Optical Pwr (Max)
Table 15-75 Near-End Regenerator Section PM Parameters for OSCM and OSC-CSM Cards
Parameter
RS-EB
RS-BBE
Cisco ONS 15454 SDH Reference Manual, R4.6
15-60
shows where overhead bytes detected on the ASICs produce performance monitoring
OSCM/OSC-CSM
OCEAN ASIC
RS-EB
RS-BBE
RS-ES
RS-SES
OSC
PMs read on OCEAN ASIC
15-61.
Definition
Minimum transmit optical power (dBm)
Average transmit optical power (dBm)
Maximum transmit optical power (dBm)
Definition
Regenerator Section Errored Block (RS-EB) indicates that one or more
bits are in error within a block.
Regenerator Section Background Block Error (RS-BBE) is an errored
block not occurring as part of an SES.
FE
100BaseT
MS-EB
MS-BBE
MS-ES
MS-SES
MS-UAS
DCN
to TCC2
2EOW
to AIC
Other
Overhead
Chapter 15 Performance Monitoring
Table 15-74 through
April 2008