Ddns - Cobra 57648 Owner's Manual & Safety Instructions

USER MANUAL
UPNP: If you want to log in remotely to the NVR using Web Client, you need to complete the
port forwarding. Enable this option if your router supports the UPnP. You need to enable
UPnP both, on NVR and router. In this case, you do not need to configure manually port
forwarding on your router. If your router does not support UPnP, make sure the port
forwarding is completed manually
Mapping Strategy: Setting up manual mode, it could be manually set up External Port.

5.5.2 DDNS

This menu allows you to configure DDNS settings. The DDNS provides a static address to
simplify remote connection to your NVR. To use the DDNS, you first need to open an account
on the DDNS service provider's web page.
DDNS: Check to enable DDNS.
Server: Select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, CHANGEIP,
DNSEXIT).
Domain: Enter the domain name you created on the DDNS service provider's web page.
This will be the address you type in the URL box when you want to connect remotely to the
NVR via PC. Fox example: NVR.no-ip.org.
User/Password: Enter the user name and password you obtained when creating an account
on the DDNS service provider's web page.
After all parameters are entered, click Test DDNS to test the DDNS settings. If the test result
is "Network is unreachable or DNS is incorrect", please check whether the network works
fine, or the DDNS information is correct or not.
86