Poe Nvr Connection - Cobra 57648 Owner's Manual & Safety Instructions

5.1.1.3.1 PoE NVR Connection

For the PoE NVR, it is allowed to connect the IP cameras via the internal PoE ports and/or
external LAN(WAN) port.
NOTE: It is not recommended to connect more than 1 camera via switch or router to
the PoE port. One PoE port is allowed to connect one IP camera only.
PoE not only provides power over ethernet but only supports plug & play connection for IP
cameras.
Switch Mode: Auto mode supports Plug & Play connection via PoE port. If you want to add
camera(s) manually then change the mode to Manual.
Switch Mode: Auto mode limits the maximum bandwidth to 100Mbps, EPOE mode limits
the maximum bandwidth to 10Mbps. If you have a connection problem with Auto mode when
the IP camera is powered by PoE via a RJ45 cable longer than 100 meters, then change to
EPOE mode for a stable connection.
Edit: To edit the Switch mode, PoE mode, network parameters, user name and password for
individual camera.
18
USER MANUAL