Steps To Connect Plug & Play Poe Cameras; Steps To Connect External Cameras In The Lan - Cobra 57648 Owner's Manual & Safety Instructions

8 channel 4knvr security system with (2) 4k-uhd resolution cameras

Table of Contents

5.1.1.3.1.1 Steps to Connect Plug & Play PoE Cameras

1. Keep the default settings.

2. Change the default user name and password to be same with the cameras.

3. Make sure your IP camera is set to DHCP IP address already. If your camera is set to

static IP address which is different from the IP address segment inside the PoE router,

your IP camera will be unable to get online. Check more in

4. Connect your IP camera into the PoE port on the rear panel.

5. Camera will be online and displayed in the camera list after its startup.

6. Check the connection status: if the icon is

icon is

then the camera is failed to connect. Click the icon to check the failure reason.

If the reason is "User name or password error", that means the default user name and

password is not same with the camera's. Click the edit icon

and password which is same with the camera's.

If you want to connect to an IP camera from LAN, please make sure your NVR is well-

connected to the LAN and the IP camera you want to add is in the same network segment

with your NVR.

If you want to all channels manually, click the drop-down arrow next to Switch Mode, and

then select "Manual".

5.5.1.1 Network 

then the camera is well-connected; if the

USER MANUAL

General.

to modify the user name

Table of Contents