Hm (Heat Map) - Cobra 57648 Owner's Manual & Safety Instructions

to enter number; if a target object is detected moving from side A to side B, the system
will count 1 to exit number.
5. Use your mouse to click 2 points in the camera picture to draw a virtual line.
6. Click Save to save your settings.
7. If you want to modify the position or length of the line, click the red box in the line, the
color of the line will be changed to red color. Click and hold the left button of your mouse
to move the line, or drag the terminals to modify the length or position of the line.
8. If you want to remove one of the lines from the camera picture, click the red box in the
line and then click

5.4.1.6 HM (Heat Map)

Automatically regular detect and count the movement of objects in the monitoring area. The
frequency of people flows will be identified by different colors.
Switch: Check the box to enable LCD function.
Click Setup icon
1. To enable the detection in
2. Use your mouse to click 4 points in the camera picture to draw a virtual region. The sharp
of the region should be a convex polygon. Concave polygon will be not able to save.
3. Click Save to save your settings.
4. If you want to modify the position or sharp of region, click the red box in the region, the
Remove button. Click
to configure the detection conditions.
Rule Switch.
Remove All will delete all lines.
66
USER MANUAL