Table of Contents
Advertisement
1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the
NVR's USB port.
2. Click Select File button to choose the firmware file in your USB flash drive, then Click OK.
3. Click
Upgrade
button to start system upgrade. The system upgrade will last around 5-10
minutes, please do
upgrade.
5.7.3.4 Parameter Management
You can export the main menu settings you have configured to a USB flash drive, or import
an exported setting file from USB flash drive to the NVR.
Save
Settings: Click to save the NVR current system settings to the USB device. You will be
required to input the Admin password to authenticate.
Load
Settings: Once you have created a system settings export, you can import the settings
on another NVR. Click
to import from your USB flash driver. You will be required to input the Admin password to
authenticate.
5.7.3.5 Auto Reboot
This menu allows the system to auto reboot the NVR regularly. It is recommended to leave
this function enabled, as it maintains the operational integrity of your NVR.
NOT
power off the NVR or remove the USB from NVR during firmware
Load Settings
button to navigate to the system settings file you want
126
USER MANUAL
Advertisement
Table of Contents
