Ip Filter - Cobra 57648 Owner's Manual & Safety Instructions

5.5.5 IP FILTER

IP filter helps to control the remote login devices by using Allow List and Block List to filter the
IP address.
If you want to activate this function, check the
1.
Choose either Enable Allow List
2.
IP address in the list to visit the NVR. Block List will block those IP address in the list to
visit the NVR.
Choose one of the
3.
Set the Start IP address
4.
Click Single Add
5.
Click Network Segment Add
6.
address.
Click Edit icon to edit the IP address.
7.
Click Delete icon
8.
Remove IP to delete multiple IP address at one time.
or Enable Block
Restricted Types
and End IP Address.
to add individual IP address.
to add the IP range from the start IP address to the end IP
to delete the IP address. Choose multiple IP address, and click
Enable box.
List. Allow List will only allow those
you want to set.
90
USER MANUAL