Chapter 7 Remote Access via Web Client
Use the Web Client to remotely access your NVR at any time via a PC. Before you access
the Web Client, you need to ensure that the internet settings of the NVR are configured
properly.
7.1 Basic System Environment Requirements
The minimum requirements for hardware and OS required to run Web Client are given as
below.
Item
CPU
RAM
Hard Drive
Display RAM
Display Resolution
OS
DirectX
Direct3D
Ethernet Adapter
Browser
7.2 Web Plugin Download and Installation
In order to access the Web Client, you would need to install the plug-in for Internet Explorer.
It is unnecessary to install plug-in for Edge, Firefox, Google Chrome and Mac Safari.
1. Launch the explorer on your PC and enter the NVR IP address or DDNS domain name
(Host Name) you have set on NVR in the URL box.
2. For the first time you run the web client, system will require to install the web client plugin.
Click
to download the plugin and install to your computer.
download
Minimum
Intel® Core™ i5 CPU
4G or more
500G or more
2G or more
1280*1024
Windows 10 or above
Mac OS X® 10.9 or above
DirectX 11
Acceleration Function
10/100/1000M Ethernet Adapter
Microsoft Internet Explorer, Edge, Firefox, Google Chrome, Mac Safari
Recommended
Intel® Core™ i5 CPU or higher
8G or more
1000G or more
4G or more
1920*1080
170
USER MANUAL