Using The Switchboard Cable Id 70212; Using A Self Assembled Connecting Cable - AEG ARE i2 - HF Installation Manual

3.3.2 Using the switchboard cable ID 70212

Power supply:
Data interface:

3.3.3 Using a self assembled connecting cable

Using the following SAB cabs you can assemble your own connecting cable.
ID 70211
ID 70215
ID 70219
You can use any shielded five-pole cable. The allowed diameter of the cable must be in the range from
3,5 to 8mm. For this case, IP 65 is reached.
--------------------------------------------------------------------------------8/50--------------------------------------------------------------------------------
brown = + 9 .. 30 Volt
white = ground
green = RXD (readers data input)
yellow = TXD (readers data output)
grey = ground
SAB cab with 1 PG9 cable pipe
SAB cab with 2 pre-assembled cable pipes
SAB cab without any cable pipe