Wdm - Write - AEG ARE i2 - HF Installation Manual

PARAMETER 2
1 or 2 character
PARAMETER 3
32 characters
8 characters
up to 32 charac-
ters
Note: The ISO 15693 regulates just the maximum length of one block. With the write instruction you
can write multiple blocks at once. The datalenght has to be at least the block size or a multiple of the
block size.
5.4.8 WDM – write page manual
With the command WDM you write one page to the transponder. The writing command is executed
alone. You have to select the transponder first. If you are using a mifare standard 1K/4K you have to log
in, too.
Input format mifare 1K/4K:
Input format ultralight:
Output (example):
Parameters:
PARAMETER 1
1 or 2 characters
PARAMETER 2
1 or 2 characters
--------------------------------------------------------------------------------31/50--------------------------------------------------------------------------------
FUNCTION
block
FUNCTION
mifare 1K/4K
ultralight
ISO 15693
WD <SP> parameter 1 <SP> parameter 2 <SP> parameter 3
<CR>
WD <SP> parameter 2 <SP> parameter 3 <CR>
ACK <CR>
FUNCTION
sector
FUNCTION
block