Rdm - Read - AEG ARE i2 - HF Installation Manual

Input format ISO 15693 one block:
Input format ISO 15693 multiple blocks:
Output:
Parameters:
PARAMETER 1
1 or 2 characters
PARAMETER 2
1 or 2 characters
PARAMETER 3
1 or 2 characters
PARAMETER 4
32 characters
8 characters
up to 64 charac-
ters
5.4.6 RDM – read page manual
With the command RDM you can read out a page of the transponder. The reading command is executed
single. You have to do a get tag first. If you are using a mifare standard 1K/4K you have to log in, too.
Input format mifare 1K/4K:
Input format ultralight:
Input format ISO 15693:
Input format ISO 15693 multiple blocks:
Output:
--------------------------------------------------------------------------------29/50--------------------------------------------------------------------------------
RD <SP> parameter 2 <CR>
RD <SP> parameter 2 <SP> parameter 3 <CR>
parameter 4 <CR>
FUNCTION
sector
FUNCTION
block/start block
FUNCTION
end block
FUNCTION
data (mifare 1K/4K)
data (ultralight)
data (ISO 15693)
RD <SP> parameter 1 <SP> parameter 2 <CR>
RD <SP> parameter 2 <CR>
RD <SP> parameter 2 <CR>
RD <SP> parameter 2 <SP> parameter 3 <CR>
parameter 4 <CR>