Set Iso Standard; Vsave - Variables Save; Vs - Variables Show - AEG ARE i2 - HF Installation Manual

5.3.7 SI – set iso standard
With this command you can switch the iso standard of the reader.
Input format:
Output (example):
Parameter:
PARAMETER
0
1
5.3.8 VSAVE – variables save
With the command VSAVE the following parameters are saved to the internal EEPROM:
2 1
AFI , KM , KT
Input format:
Output (example):
1
just available in the ISO 14443A standard
2
just available in the ISO 15693 standard
5.3.9 VS – variables show
With the command VS the reader shows the settings of the following parameters:
2 1
AFI , KM , KT
Input format:
Output (example):
--------------------------------------------------------------------------------25/50--------------------------------------------------------------------------------
SI <SP> parameter <CR>
0 <CR>
FUNCTION
ISO 14443A
ISO 15693
1
, MD, SI, TOR
VSAVE <CR>
ACK <CR>
1
, MD, SI, TOR
VS <CR>
ACT <SP> 14 <CR>
AM <SP> 0 <SP>
...