Introduction; System Overview; Installation; Mounting Of The Housing - AEG ARE i2 - HF Installation Manual

1

Introduction

This document will describe the components of the Compact Reader System ARE i2 / RS 232 and the
procedure how to do the first set up of the reader.
The main features of the reader are listed below:
 integrated RS232 Interface with tunable baudrate
 the allowed supply voltage is 9 to 30V DC
 low power consumption of reader < 1.2 Watt
 high reliability for reading and writing within an industrial environment
 compact housing of the reader with multiple ways for mounting
 the cabling concept of the reader is optimised to service demands
 the protection class of the housing is IP65
 there is a set of external antennas available to meet special application demands (X-tended version)
2

System overview

The ARE i2 HF is only available with external antenna.
3

Installation

To get the specified reading performance it is necessary to do the installation carefully step by step as it
is described in the following Chapters. All the work must be done by well educated people.
3.1

Mounting of the housing

The reader can be mounted to any other mechanic construction. The distance between reader and tran-
sponder has to tuned
--------------------------------------------------------------------------------5/50--------------------------------------------------------------------------------