Table of Contents
Advertisement
3.3 Reading a transponder in standard mode
Press the main button to start the reading process.
The ARE H9 starts the reading process and the display shows:
actual
count
Approach a transponder within the readers reading range.
The reader emits a beep when the transponder has been read successfully, and the transponder
code is shown on the display:
For ISO Transponder additional the retagging counter and the user information field are displayed
in the second row of the display.
In case no transponder has been read within the given time frame, the reader stops its reading
process and the display shows:
For further reading processes release the main button and press it again for each attempt.
---------------------------------------------------------------7/36-------------------------------------------------------------
0
of
2016
Scanning Nr.
Country-Code
ID
969 0000000001024
1 12
Retagging Counter and User Information
--- No Tag ---
maximum
count
1
Advertisement
Table of Contents
