Table 4-2. Fault Messages - Honeywell BendixKing KT 74 Installation Manual

Message
FPGA fault
ROM checksum failed XXXX
Receiver fault or no signal
Transmitter failed
Squitter failure
I2C write data
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007

Table 4-2. Fault Messages

Initial Action
Call BendixKing Customer Support
Call BendixKing Customer Support
Call BendixKing Customer Support
Call BendixKing Customer Support
Call BendixKing Customer Support
Call BendixKing Customer Support
BendixKing Customer Support:
• Telephone: 855-250-7027 (Toll Free U.S.A./Canada)
• Telephone: 602-365-7027 (International)
• Website: www.bendixking.com/support
• Email: techsupport@bendixking.com.
Page 4-8
15 Nov 2013