Faa 91.227 Compliance; Amc 20-24 Compliance; Automatic Air/Ground Determination - Honeywell BendixKing KT 74 Installation Manual

In all cases, uncompensated latency due to the transponder is less than 10
milliseconds. Analysis of the system latency should add this to the latency of the
GPS system and the transmission time of the position data from the GPS to the
transponder to determine the overall latency.

1.28 FAA 91.227 Compliance

The KT 74 transponder can be connected to the following GPS units to form the
basis of a 14 CFR 91.227 compliant ADS-B installation:
Freeflight 1201 WAAS/GPS sensors
NexNav MINI WAAS/GPS sensors
For installations seeking certification to 91.227 or other applicable standards,
additional compliance information is available on request.

1.29 AMC 20-24 Compliance

The KT 74 transponder can be connected to the following GPS units to form the
basis of an AMC 20-24 compliant ADS-B installation:
Freeflight 1201 WAAS/GPS sensors
NexNav MINI WAAS/GPS sensors
Garmin GNS400W and GNS500W series.
For installations seeking certification to AMC 20-24 or other applicable standards,
additional compliance information is available on request.

1.30 Automatic Air/Ground Determination

The KT 74 can report ADS-B surface and airborne messages. The ADC, airspeed,
or squat switch inputs can be utilized to determine air/ground status as explained
in Section 2.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007
Page 1-13
15 Nov 2013