Introduction; How To Use This Manual; General; Observance Of Manual Instructions - Honeywell BendixKing KT 74 Installation Manual

1. How To Use This Manual

A. General
(1) This publication gives maintenance instructions for the equipment shown on
the title page.
(2) Standard maintenance procedures that technicians must know are not given
in this manual.
(3) This publication is written in agreement with the ATA Specification.
(4) Warnings, cautions, and notes in this manual give the data that follows:

A WARNING gives a condition or tells personnel what part of an operation
or maintenance procedure, which if not obeyed, can cause injury or death

A CAUTION gives a condition or tells personnel what part of an operation
or maintenance procedure, which if not obeyed, can cause damage to the
equipment

Warnings and cautions go before the applicable paragraph or step. Notes
follow the applicable paragraph or step.
B. Observance of Manual Instructions
(1) Make sure that you carefully obey all safety, quality, operation, and shop
procedures for the unit.
(2) All personnel who operate equipment and do maintenance specified in this
manual must know and obey the safety precautions.
C. Symbols
(1) The symbols and special characters are in agreement with IEEE Publication
260 and IEC Publication 27. Special characters in text are spelled out.
(2) The signal mnemonics, unit control designators, and test designators are
shown in capital letters.
(3) The signal names followed by an "*" show an active low signal.
(4) The symbols in Figure INTRO 1 show ESDS and moisture sensitive devices.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007

INTRODUCTION

Figure INTRO 1. Symbols
Page INTRO-1
15 Nov 2013