Bnc Connector - Honeywell BendixKing KT 74 Installation Manual

Table 2-3. Maximum Usable Cable Lengths (Cont)
MAX MAX
Length in Length in
Feet-Inches Meters
12-6 3.81
17-3 5.25
21-1 6.42
26-11 8.22
41-3 12.59
When routing the cable, make sure that you:

Route the cable away from sources of heat.

Route the cable away from potential interference sources such as
ignition wiring, 400 Hz generators, fluorescent lighting and electric
motors.

Allow a minimum separation of 12 inches (300 mm) from an ADF
antenna cable.

Keep the cable run as short as possible.

Avoid routing the cable around tight bends.

Avoid kinking the cable even temporarily during installation.

Secure the cable so that it cannot interfere with other systems.

2.8.2 BNC Connector

This section describes the technique for attaching the antenna cable to the
supplied blind-mate BNC connector.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007
Insertion
Loss
dB/meter at MIL-C-17
1,090 MHz Cables
0.39 M17/112
(RG304)
0.29 M17/127
(RG393)
0.23 -
0.18 -
0.12 -
Electronic
Cable
Specialists
Type
-
311601
311501
311201
310801
Page 2-15
15 Nov 2013