Approved Deviations; Physical Specifications (In Tray); Table 1-3. Physical Specifications - Honeywell BendixKing KT 74 Installation Manual

Specification
Power requirements
Altitude
Humidity
Operating temperature
Transmitter frequency
Transmitter power
Transmitter modulation
Receiver frequency
Receiver sensitivity

1.3.1 Approved Deviations

The KT 74 ADS-B function is certified to ETSO C166b which references
DO-260B as the applicable standard. Since publication of DO-260B a
corrigendum has been published; the KT 74 complies with the corrected
DO-260B which technically is a deviation from the ETSO. This deviation
has been approved by EASA.

1.4 Physical Specifications (in Tray)

Refer to Table 1-3 for the physical specifications.
Specification
Height
Width
Length
Weight
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007
Table 1-2. Regulatory Data (Cont)
Characteristics
11 to 33 VDC, typical 6.3 watts at 14 volts
55,000 feet (16.76 Km)
95% at +122°F (+50°C) for 6 hours
85% at +100°F (+38°C) for 16 hours
Tested to Category A in DO-160G
-13 to 158°F (-25 to +70°C)
1,090 MHz ± 1 MHz
240 Watts nominal; 125 Watts minimum at antenna after
allowing for 0.5 dB connector losses and 1.5 dB cable
losses.
6M75 V1D
1,030 MHz
-74 dBm ± 3 dB

Table 1-3. Physical Specifications

Characteristics
Inches (mm)
1.7 (42)
6.30 (160)
10.7 (272)
2.8 pounds (1.35 Kg)
Page 1-3
15 Nov 2013