Units Of Measure; Standard Practices Manual; Electrostatic Discharge; Bendixking Technical Publications Support - Honeywell BendixKing KT 74 Installation Manual

D. Units of Measure
(1) Measurements, weights, temperatures, dimensions, and other values are
expressed in the USMS followed by the appropriate SI metric units in
parentheses. Some standard tools or parts such as drills, taps, bolts, nuts,
etc. do not have an equivalent.
E. Standard Practices Manual
(1) Standard cleaning, check, repair, and assembly procedures applicable to
multiple models can be found in a standard practices manual. Refer to
Paragraph 2.
F. Electrostatic Discharge
(1) Touch the items susceptible to electrostatic discharge in accordance with
MIL-HDBK-263. Refer to MIL-STD-1686 for definition of the standards and
conditions.

2. BendixKing Technical Publications Support

A. Honeywell Aerospace Online Technical Publications Website
(1) Go to the Honeywell Online Technical Publications Website at
(www.myaerospace.com).

To download or see publications online

To order a publication

To tell Honeywell of a possible data error in a publication.
B. BendixKing Customer Support
(1) Call BendixKing Customer Support for all Parts, Repair, Technical Support,
and Sales information. Contact BendixKing Customer Support at:

Telephone: 855-250-7027 (Toll Free U.S.A./Canada)

Telephone: 602-365-7027 (International)

Website: www.bendixking.com/support

Email: techsupport@bendixking.com.

3. References

A. Honeywell/Vendor Publications
(1) Related Honeywell publications in this manual are shown in the list that
follows:

Pub. No. D201308000036, KT 74 Mode S Transponder Pilot's Guide

ATA No. 20-00-03 (Pub. No. A09-1100-004), Standard Repair
Procedures for Honeywell Avionics Equipment Instruction Manual.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007
Page INTRO-2
15 Nov 2013