Illustrated Parts List - Honeywell RESCU 406AFN Component Maintenance Manual With Illustrated Parts List

1. Purpose
A. This section provides a listing of all parts of the LRU(s) – shown on the title page – that can be
disassembled, repaired or replaced, and reassembled. To assist in identification, all listings are
supported with illustrations. These data are presented in the detailed parts list.
2. Assembly Order Indention System
The indention system, used in the DESCRIPTION column of the detailed parts list, shows the
relationship of one part to another. For any particular item, the degree of indention depicts the
relationship of that particular item to its associated next higher assembly, as follows:
3. Part Number
A. The part number shown in the PART NUMBER column (detailed parts list/reference designator
index/numerical index) is the part number of the true manufacturer (or authorized supplier) of that
particular item.
B. The identification of the true manufacturer (or authorized supplier) can be determined only from
the vendor code appearing in the DESCRIPTION column of the detailed parts list. See
paragraph 14 of this section for further details. Note that no vendor code entry is made with
respect to standard items (e.g., AN, MS, NAS, Military Standard, etc.), nor with respect to
Honeywell part numbers.
C. The Honeywell part numbering system and LRU identification system are shown in Table 1.
D. For the purposes of spares procurement, any item may be ordered from its applicable true
manufacturer (or authorized supplier), or from Honeywell. Note that, where alternate part numbers
are listed, Honeywell may supply an alternate – not necessarily the one ordered.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
1152682

ILLUSTRATED PARTS LIST

1 2 3 4
END UNIT
. ASSEMBLY
. . DETAIL PARTS FOR ASSEMBLY
. . SUBASSEMBLY
. . ATTACHING PARTS FOR SUBASSEMBLY
. . . DETAIL PARTS FOR SUBASSEMBLY
23-24-02
Page 1001
Oct 27/06