B. The Fault Isolation is made up of three separate troubleshooting flow charts. Each chart shows
one of three possible configurations of the system:
•
Configuration No. 1 – Transmitter Unit and Remote Panel
•
Configuration No. 2 – Transmitter Unit, Remote Panel and AIM or NAIM
•
Configuration No. 3 – Transmitter Unit, Remote Panel, AIM or NAIM and 24-bit DIP switch
module
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
1152682
23-24-02
Page 122
Oct 27/06