Honeywell RESCU 406AFN Component Maintenance Manual With Illustrated Parts List page 66

COMPONENT MAINTENANCE MANUAL
(3) Shipping of Battery
The battery pack used in the RESCU 406AFN is safe for transport in bulk by itself as well
as installed in the Transmitter Unit on passenger aircraft in accordance with exemption
173.185 (part c) of the Federal Department of Transportation Title 49 Code of Regulations
(CFR).
(4) Disposal of Battery
The spent battery packs can be sent to any site approved for proper disposal, such as
those facilities listed in Appendix C.
(5) Installation of Battery Pack
Proceed as follows:
(a) Remove the battery expiration sticker portion from the new battery pack label.
Then remove the wax paper backing from the sticker and attach the sticker to the
battery expiration section on the label of the transmitter unit.
(b) Install the new lithium battery pack in the battery compartment while holding the
transmitter battery pack connector out of the way.
(c) Connect the battery pack connector to the transmitter unit connector.
(d) Fold the battery pack pull-tabs and flatten against the top of the battery pack.
(e) Install the battery pack cover on the transmitter unit and secure using eight
screws.
(f) Reinstall the transmitter unit.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
1152682
23-24-02
Page 603/604
Oct 27/06