Honeywell RESCU 406AFN Component Maintenance Manual With Illustrated Parts List page 54

Emergency locator transmitter
Table of Contents

Advertisement

TABLE 105. REMOTE PANEL CONNECTOR J1 PIN-OUTS (Cont'd)
Pin
Pin Label
F
LEDDRIVE
G
RESET2
H
EXTL WARNING
J
DC GROUND
K
5 VAC PANEL
LIGHT
L
AC GROUND
M
LIGHT TEST
N
28 VDC
P
LIGHT
R
ELTONPULSE
S
MC STEADY
STATE
T
MC PULSE
U
ELTON MC
INPUT
V
LINK2
4.
Fault Isolation for RESCU 406AFN
A. Use the Fault Isolation charts that follow as a troubleshooting guide at the same time as the
Installed System Tests. If the results of one of those tests are unsatisfactory, use the Fault Isolation
Flowcharts (Figures 103 to 105) to isolate the system component that is the problem.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
1152682
(I/O)
Input
With 28 V dc connected to pin N, one
of LIGHT or LEDDRIVE is necessary
to drive LED indicator. With
LEDDRIVE connected, LED will have
a blinking ON indicator.
Output
To transmitter unit, to send the
position of the 3-position functional
switch.
Output
Contact closure to ground, when
transmitter sends. Connected
internally to pin C.
Input
To aircraft dc ground
Input
Necessary if panel backlit used.
Connect to 0 – 5 V ac 400 Hz.
Input
Necessary if 5 V ac is connected.
Input
Supplies contact closure to ground, to
operate LED indication. Available only
if 28 V dc is connected to pin N.
Input
Supplies Light Test to do a test of LED
or ON LED indication show
constantly.
Input
LIGHT or LEDDRIVE signal is
necessary from transmitter unit to
drive LED. With LIGHT, LED ON
indication is constant. With
LEDDRIVE, ON indication blinks.
Input
From transmitter unit, momentary
contact closure to ground. Used on
B737NG
Output
From pin U. Used on B737NG.
Output
From pin R, ELTONPULSE.
Momentary 50 millisecond pulse to
ground. Used on B737NG.
Input
From transmitter unit. Contact closure
to ground with transmitter unit started.
Used on 737NG.
Input/
Connected to pin B.
Output
Description
23-24-02
Requirements
Required if 28 V
dc not used
Required
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Page 121
Oct 27/06

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1152682-2

Table of Contents