Table of Contents
Advertisement
3
Remove the grounding wire assembly from the PDU access cover bolts and
attach this end to the faceplate drop port F-connector.
4
Proceed to To Attach the Faceplate to the Housing (on page 35).
To Install the Twisted Pair PDU on a Pedestal-Mounted Surge-Gap Multimedia
Tap
Follow these steps to install the Twisted Pair PDU on a pedestal-mounted tap.
1
Attach the grounding wire assembly to the strand clamp bolt and the nearest
PDU access cover bolt. Refer to the following diagrams.
4013399 Rev C
WARNING:
Protect yourself from electric shock and your equipment from damage!
Certain components can deliver an electrical shock during hot installation.
Installing the Twisted Pair PDU
39
Advertisement
Table of Contents
