Table of Contents
Advertisement
5
Remove the plastic protective cover from the Coax PDU.
6
Proceed to To Install the Coax PDU on a Strand-Mounted Surge-Gap
Multimedia Tap (on page 33) or To Install the Coax PDU on a Pedestal-
Mounted Surge-Gap Multimedia Tap (on page 34) to complete your installation.
To Install the Coax PDU on a Strand-Mounted Surge-Gap Multimedia Tap
Follow these steps to install the Coax PDU on a strand-mounted tap.
1
Attach the grounding wire assembly to the strand wire and the nearest PDU bolt
clearance hole. Refer to the following diagrams in this step for the location of the
grounding wire assembly.
2
Press the PDU onto the back housing of the tap. Refer to the illustration in step 3.
4013399 Rev C
WARNING:
Protect yourself from electric shock and your equipment from damage.
Certain components can deliver an electrical shock.
Installing the Coax PDU
33
Advertisement
Table of Contents
