Table of Contents
Advertisement
Chapter 2 Installing the Tap
4
Remove the plastic protective cover from the Twisted Pair PDU.
5
Proceed to To Install the Twisted Pair PDU on a Strand-Mounted Surge-Gap
Multimedia Tap (on page 38) or To Install the Twisted Pair PDU on a Pedestal-
Mounted Surge-Gap Multimedia Tap (on page 39) to complete your installation.
To Install the Twisted Pair PDU on a Strand-Mounted Surge-Gap Multimedia Tap
Follow these steps to install the Twisted Pair PDU on a strand-mounted tap.
1
Attach the grounding wire assembly to the strand wire and the nearest PDU
access cover bolt. Refer to the following diagram for the location of the
grounding wire assembly.
2
Push the Twisted Pair PDU onto the back housing of the tap. Refer to the
illustration in step 3.
38
WARNING:
Protect yourself from electric shock and your equipment from damage!
Certain components can deliver an electrical shock during hot installation.
4013399 Rev C
Advertisement
Table of Contents
