Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
or
2
8
6
5
or
2
8
6
2 Press the '
/
2
Night Settings options until the Heat Det. End Delay
screen is displayed.
[Setup]
Heat Det. End Delay = No
> : Change
3. Press the '
' button to toggle this function.
6
[Setup]
Heat Det. End Delay = Yes
> : Change
4 Press '
' to exit and return to the Setup menu
4
screen. The selection is saved on exiting.
5.5.5.6 Day Mode 2 Zone End Delay
The Day Mode function, Delays to outputs, can be
cancelled by a second zone going into alarm. To select
the Day Mode 2 Zone End Delay option:
[S1
Setup]
1: Panel Options
2: Site Details
3: Device Options
[S1
Setup]
5: Day / Night Settings
1 From the Setup menu screen, press the '
on the numeric keypad to enter the Day/Night Settings
menu. The Day Mode Activity screen is displayed first.
[Setup]
Day mode activity = DISABLED
> : Change
1 : Disable
2 Press the '
/
2
Night Settings options until the Day Mode 2 Zone End
Delay screen is displayed.
[Setup]
Day Mode 2 Zone End Delay = No
> : Change
3. Press the '
' button to toggle this function.
6
[Setup]
Day Mode 2 Zone End Delay = Yes
> : Change
4 Press '
' to exit and return to the Setup menu
4
screen. The selection is saved on exiting.
5.5.5.7 Delays Indication
Select
whether
DISABLEMENTS LEDs are lit or the DELAYS ACTIVE
LED only is lit for active delays using this option.
[S1
Setup]
1: Panel Options
2: Site Details
3: Device Options
[S1
Setup]
5: Day / Night Settings
63
' buttons to step through the Day/
8
: More
< : Exit
: More
< : Exit
: More
4: Peripheral Options
: More
< : Exit
' buttons to step through the Day/
8
: More
< : Exit
: More
< : Exit
the
DELAYS
ACTIVE
: More
4: Peripheral Options
997-457-000-8, Issue 8
January 2010
: More
' button
5
and
: More
Advertisement
Table of Contents
