Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
1
or
2
6
1
or
2
6
1
997-457-000-8, Issue 8
January 2010
Language screen is displayed first.
[Setup] Language =
> : Change
2 Press the '
8
Options menus until the LED 2C Mode screen is displayed.
[Setup]
> : Change
3 Press the '
[Setup]
> : Change
4 Press '
changes will be saved on exiting.
5.5.1.6 Un-mute
This option is used to control how new alarms un-mute
the internal buzzer, i.e. new alarms occurring in zones
not previously in alarm or for any new device going into
alarm. To set the desired un-mute option:
1 From the Setup menu screen, using the numeric
keypad press the '
Options menu. The Language screen is displayed first.
[Setup] Language =
> : Change
8
2 Press the '
Options menus until the Un-mute screen is displayed.
[Setup]
> : Change
3 Press the '
alarm' and 'On new point alarm' input options.
[Setup]
> : Change
4 Press '
changes will be saved on exiting.
5.5.1.7 Diagnostic Mode
The Diagnostic Mode option allows extended fault and
fire reporting and determines whether events are
suppressed until confirmed. To enable Diagnostic Mode:
1 From the Setup menu, using the numeric keypad
press the '
The Language screen is displayed first.
[Setup] Language =
> : Change
40
English
: More
/
' buttons to step through the Panel
2
8
LED 2C =
Pre-alarm
: More
' button to toggle the LED function.
6
LED 2C =
Sounders Silenced
: More
' to return to the Setup menu screen. All
4
' button to enter the Panel
1
English
: More
/
' buttons to step through the Panel
2
8
Un-mute = On new zone alarm
: More
' button to toggle between 'On new zone
6
Un-mute = On new point alarm
: More
' to return to the Setup menu screen. All
4
' button to enter the Panel Options menu.
1
English
: More
< : Exit
< : Exit
< : Exit
< : Exit
< : Exit
< : Exit
< : Exit
Advertisement
Table of Contents
