Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
1
or
2
8
6
2
6
997-457-000-8, Issue 8
January 2010
1 From the Peripheral Options screen, press the '
button on the numeric keypad to select the RS485
Communications port option. The RS485 Protocol
setup screen is displayed:
[Setup]
RS485 Protocol =
> : Change
2 Press the '
/
2
8
menu until the Suspend Comms Limit screen is
displayed.
[Setup]
Suspend Comms Limit =
> : Change
3 Press the '
' button if the limit is to be changed.
6
[Setup]
Suspend Comms Limit =
Enter new value 60
4 Using the numeric keypad, enter the new value (in
minutes) and confirm using the '
automatically returns to the Suspend Comms Limit
screen. Alternatively, press '
5.5.4.6 RS232 Protocol
This option enables the protocol of the RS232 port to be
configured for use with the following driver:
a. External printer (default selection).
b. Third party equipment
c. GSM Modem.
1 From the Peripheral Options screen, press the '
button on the numeric keypad to select the RS232
Communications port option. The RS232 Protocol
setup screen is displayed:
[Setup]
RS232 Protocol =
> : Change
2 Press the '
' button to toggle between 'PRINTER'
6
and 'THIRD PARTY'.
[Setup]
RS232 Protocol =
> : Change
3 Press '
' to return to the Peripheral Options menu
4
screen.
5.5.4.7 Print Control or Third Party
This option is dependent upon the selected RS232
operating mode (see Section 5.5.4.6).
If the RS232 port is set to PRINTER, the available 'Print
Control' options are:
a. BASIC - slow mode, no handshaking (default option).
54
THIRD PARTY
: More
< : Exit
' buttons to scroll through the Setup
0 mins
: More
< : Exit
0 mins
: Confirm
< : Cancel
' button. The LCD
5
' to cancel the change.
4
PRINTER
: More
< : Exit
THIRD PARTY
: More
< : Exit
'
1
'
2
Advertisement
Table of Contents
