Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
1
3
or
2
6
997-457-000-8, Issue 8
January 2010
To disable this function
1 To disable Auto High Test, press the '
[Setup]
> : Change
[Setup]
> : Change
2 Press '
5.5.3.4 Digital Input 1
Digital Input 1 can be configured as either Day Mode
Start or Class Change function.
When configured as Day Mode Start, activation from the
input during the Day Mode period starts/ends Day Mode
delays, depending on their current state.
When Class Change is selected outputs assigned to CBE
Rules that have Class Change configured will activate
when Digital Input 1 is operated.
To configure Digital Input 1:
1 Using the numeric keypad, press '
screen to select the Device Options menu. The Device
Blinking screen is displayed first.
[Setup]
> : Change
8
2 Press either '
the Digital Input 1 menu is displayed.
[Setup]
> : Change
3 Press '
Class Change.
[Setup]
> : Change
4 With the required configuration of Digital Input 1
displayed, press '
5.5.3.5 Maximum LEDs ON
The maximum number of LEDs turned on in alarm or
fault conditions can be set to 10 or 2. Fire takes priority;
a fault LED will be tirned off to allow a fire LED to be
turned on if the LED maximum has been reached.
[Setup]
> : Change
Press '
'
' to return to the Setup menu screen.
4
46
Auto High Test = 07:46
1 : Disable
: More
Auto High Test = DISABLED
1 : Disable
: More
' to return to the Setup menu screen.
4
Device Blinking = ON
: More
/
' to step through the options until
2
8
Digital Input 1 =
Day Mode Start
: More
' to toggle between Day Mode Start and
6
Digital Input 1 =
Class Change
: More
' to return to the Setup menu screen.
4
Max. LEDs ON = 10
: More
' to toggle between 10 (default) and 2 or press
6
' button:
1
< : Exit
< : Exit
' at the Setup
3
< : Exit
< : Exit
< : Exit
< : Exit
Advertisement
Table of Contents
