Honeywell NOTIFIER ID62 Installation, Commissioning & Configuration Manual page 116

Hide thumbs Also See for NOTIFIER ID62:
Table of Contents

Advertisement

ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
BATTERY MISSING - the presence of the batteries
cannot be detected. Action: Check battery connections.
BATTERY DISCHARGED - the output voltage of the
batteries has fallen below the mimimum required for
correct panel operation. Action: check the condition of
the batteries.
BATTERY WIRING FAULT - the impedance of the battery
wiring is too high. Action: Check the battery wiring
connections.
Processor Faults
CPU RESTART - The control panel has been reset either
by a complete removal of power to the panel, pressing
the reset button on the base board or automatically by
the on-board watchdog program. Action: If the latter case
keeps occuring replace the base board.
SOFTWARE CHECKSUM FAILURE - Continual internal
checking of the program memory has found some
corruption. Action: The base board should be re-
programmed. If this does not clear the fault, replace the
base board.
Other Hardware Faults
INPUT OPEN CIRCUIT - Open-circuit wiring fault
detected on the loop or on-board monitored input circuit.
Action: Check wiring.Check correct EOL device is fitted
to input device.
INPUT SHORT CIRCUIT - Short-circuit wiring fault
detected on the loop or on-board monitored input circuit.
Action: Check wiring. Check correct EOL device is fitted
to input device.
OUTPUT OPEN CIRCUIT - Open-circuit wiring fault
detected on an on-board sounder or monitored loop
output device. Action: Check wiring. Check correct EOL
device is fitted to output device.
OUTPUT SHORT CIRCUIT - Short-circuit wiring fault
detected on an on-board sounder or monitored loop
output device. Action: Check wiring. Check correct EOL
device is fitted to output device.
LOW CHAMBER - Optical chamber fault in a smoke
sensor has occurred. Action: Replace sensor.
IR LIGHT SATURATION - The Infra-red (IR) cell in a
SMART 3 or SMART 4 multi-criteria sensor is 'flooded'
with IR radiation. Action: Replace sensor.
MAINTENANCE ALERT - The optical smoke chamber
of a muti-criteria device has reached 80% drift
compensation. Action: requires cleaning.
MAINTENANCE URGENT - The optical smoke chamber
of a muti-criteria device has reached 100% drift
compensation. Action: Urgent requirement for cleaning.
997-457-000-8, Issue 8
A3 - 3
January 2010

Advertisement

Table of Contents
loading

This manual is also suitable for:

Notifier id61

Table of Contents