Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
or
2
8
6
1
2
8
or
6
1
or
2
8
2 Press the '
/
2
Options until the Diagnostic Mode option is displayed.
[Setup]
Diagnostic Mode = ON
> : Change
3 Press the '
' button to select the required setting,
6
either ON or OFF.
[Setup]
Diagnostic Mode = OFF
> : Change
4 Press '
' to return to the Setup menu. All changes
4
will be saved on exiting this menu.
5.5.1.8 VdS Compatibility
The VdS Compatibility option must be set to 'Disabled'.
1 From the Setup menu, using the numeric keypad press
the '
' button to enter the Panel Options menu. The
1
Language screen is displayed first.
[Setup] Language =
> : Change
2 Press the '
/
2
Options until the 'VdS Compatibility' screen is displayed.
[Setup]
VdS Compatibility =
> : Change
3 If necessary, press the '
Compatibility from 'ENABLED' to 'DISABLED'.
4 Press '
' to return to the Setup menu screen. All
4
changes will be saved on exiting this menu.
5.5.1.9 Event Printing
This option is used to select the method of printing used,
either:
a. On-Demand. Events are not printed until requested
via the User Print menu.
b. Continuous. Events are printed when they occur.
To change the printing method:
1 From the Setup menu, press the '
numeric keypad to display the first Panel Options screen:
[Setup] Language =
> : Change
2 Press the '
/
2
8
until the Event Printing menu is displayed.
[Setup] Event Printing = On-Demand
> : Change
3 Press the '
6
41
' buttons to step through the Panel
8
: More
< : Exit
: More
< : Exit
English
: More
< : Exit
' buttons to step through the Panel
8
DISABLED
: More
< : Exit
' button to change VdS
6
' button on the
1
English
: More
< : Exit
' buttons to scroll through the options
: More
< : Exit
' button repeatedly to toggle the
997-457-000-8, Issue 8
January 2010
Advertisement
Table of Contents
