Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
1
2
5
997-457-000-8, Issue 8
January 2010
2 Using the numeric keypad enter the Access Level 3
passcode. The Sensor Maintenance screen is
displayed:
[Sn Maint]
1: Display
3: Service
3 Press the '
' pushbutton on the numeric keypad to
1
display VIEW
, MULTI, Optiplex and SM4 sensor
TM
maintenance data:
[Sn Maint] Snn AAA dd/mm/yy mm/hh
< - - - - - - - - - - - - - Zone Text - -- - - - - -- - - - - - - >
The device reference and type is given along with the date
and time the sensor entered the maintenance state. The
current maintenance state of the VIEW
SM2, SM3 and SM4 sensor is also given, i.e. Active. The
status will remain Active after the 100-day advisory period
has elapsed.
Note: Where maintenance data for more than one sensor
is listed in the log, use the '
review the other log entries.
SM4 Sensor Replacement
When a VIEW
, MULTI, Optiplex/SM2, SM3 or SM4 sensor
TM
has been replaced, the maintenance log entry for that device
is retained but the maintenance status is changed to 'Inactive'
and will remain in the log until it is manually deleted.
[Sn Maint] Snn AAA dd/mm/yy mm/hh
< - - - - - - - - - - - - - Zone Text - -- - - - - -- - - - - - - >
Deleting Maintenance Log Data
Sensor data 'demoted' to Inactive status can be removed
from the maintenance log; all Active status data will be
retained. To delete all inactive data:
5 Using the numeric keypad press
'Clear' option.
Clear inactive maintenance entries?
Press
to Confirm
6 Press the '
' button to confirm. The Maintenance
5
menu screen is re-displayed.
When all inactive log entries have been deleted and with
no active log entries present, the following message is
displayed:
* * * * No Devices in Maintenance
7 Press the '
' button to return to the View Mode
4
menu.
A2 - 8
2: Clear
Active
, MULTI, Optiplex/
TM
/
' buttons to
2
8
Inactive
to select the
2
<: Cancel
* * * *
Advertisement
Table of Contents
