Table of Contents
Advertisement
application-layer protocol that can determine the public IP and nature of a NAT device
that sits between the STUN client and STUN server.
How to Show VoIP Connection Status
- Help
IVD/voip> PortStatus ?
- Show voip status of port#
IVD/voip> PortStatus <Port>
- Show all voip status
IVD/voip> PortStatus
Port
Register Status
Call Status
Call Type
Caller Number
Callee Number
Start Time
Remote RTP Address It shows the IP address of remote voice site.
Remote RTP Port
RTP Statistic
Codec Type
Packet Period
VAD
DTMF Relay
How to Show SIP Syslog Message
- Help
IVD/system> syslogd ?
- Display the syslog setting
IVD/system> syslogd -s
- Edit the syslog setting
IVD/system> syslogd <Active> <RIP> <RPort>
How to Set Incoming Call Barring Setting
- Help
IVD/voip/sip/incallbarring> set ?
- Display the setting
IVD/voip/sip/incallbarring> set -s
- Edit the class, match mode and speeddial entries
IVD/voip/sip/incallbarring> set <Class> <MatchName> <MatchIP> <SpeeddialFrom>
Quick Start Guide for VigorAccess
Port number is 1 ~ 24
It shows the status of registering in proxy server.
It shows the calling status.
It shows the dialing direction for this phone calling.
It shows the phone number of caller.
It shows the phone number of calling receiver.
It shows the starting time of calling.
It shows the used port number of remote voice site.
It shows the RTP Statistic.
It shows the Codec mode used for this phone calling.
It shows the period of time for sampling on voice signal.
It shows the status of VAD.
It shows the status of DTMF.
<SpeeddialTo>
Version: 1.2
33
Advertisement
Table of Contents
