Table of Contents
Advertisement
How to Change ADSL Line Rate
Users can use the following command to change the ADSL Line Rate for specified DSL port. The
commands are listed as below.
Command
$modify adsl line intf ifname dsl-*
disable
$modify adsl line profile ifname dsl-*
atucintlmaxtxrate 0x7e0000
$modify adsl line intf ifname dsl-*
enable
How to Change ADSL to Fast Channel/Rate
Users can use the following command to change the ADSL to fast channel/rate for specified DSL port.
The commands are listed as below.
Command
$modify adsl line intf ifname dsl-*
disable
$modify adsl line profile ifname dsl-*
type fastOnly atucfastmaxtxrate
0x7e0000
$modify adsl line intf ifname dsl-*
enable
How to Set ADSL Alarm Profile
Users can use the following command to change the ADSL Alarm profile for specified DSL port. The
commands are listed as below.
Command
$modify adsl line intf ifname dsl-*
disable
$modify adsl alarm profile ifname
?
dsl-*
$modify adsl line intf ifname dsl-*
enable
How to Change VPI/VCI for Existing VCC
Users can use the following command to change VPI/VCI for existing VCC. The commands are listed as
below. We strongly recommend to delete original VCC then re-create a new VCC with new values again.
Command
$pvc delete <dsl: 1~24> <pvc: 1~8>
$pvc create <dsl: 1~24> <pvc: 1~8> <vpi>
<vci> [<llcmux|vcmux>]
[<interleaved|fast>]
12
Description
Disable
(*: 0 ~ 23)
Necessary variables
(*: 0 ~ 23)
Enable
(*: 0 ~ 23)
Description
Disable
(*: 0 ~ 23)
Necessary variables (*: 0 ~ 23)
Enable
(*: 0 ~ 23)
Description
Disable
(*: 0 ~ 23)
(*: 0 ~ 23, ?: means to get more information)
Enable
(*: 0 ~ 23)
Description
Quick Start Guide for VigorAccess IVD
Version: 1.2
Advertisement
Table of Contents
