Wizard Commands - Draytek Vigor VigorAccess IVD Quick Start Manual

Wizard Commands

In addition to the primitive commands described as above. Several wizard commands are provided which is
used easily. Type wizard to see the command syntax.
Command
$ wizard
<List of Wizard Commands>
---------------------------------------------------------------
$dsl show [fast]
$alarm show
$pvc show
$pvc create <dsl: 1~24> <vc: 1~8> <vpi> <vci> [<llcmux|vcmux>] [<interleaved|fast>]
$pvc delete <dsl: 1~24> <vc: 1~8>
$bridge delete <bridge id: 1~193>
$tca show <acked>
$critical show <acked>
$firmware upgrade [-]<source file> <CP|DP|FD|DSL|ALL> <server ip>
$fd show
$port <disable|enable|restart> <dsl: 1~24>
$config backup <filename> <server ip>
$config restore <filename> <server ip>
---------------------------------------------------------
dsl show [fast]
firmware upgrade
config backup/restore
Quick Start Guide for VigorAccess
Description
Display all the 24 ports DSL status
Upgrade firmware without removing the existing
one in advance
Backup or restore the current configuration
Version: 1.2
17