31.yy Replace defective or missing cartridge
The toner cartridge is either missing or not functioning properly.
Try one or more of the following:
Remove the toner cartridge, and then reinstall it.
•
Remove the toner cartridge, and then install a new one.
•
32.yy Cartridge part number unsupported by device
Remove the toner cartridge, and then install a supported one.
34 Short paper
Try one or more of the following:
Load the appropriate paper or other specialty media in the proper tray.
•
Touch Continue to clear the message and print the job using a different paper tray.
•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties or Print dialog settings to make sure the print job is requesting the correct paper size
•
and type.
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the
•
paper is large enough for the data being printed.
Cancel the current print job.
•
35 Insufficient memory to support Resource Save feature
Try one or more of the following:
Touch Continue to disable Resource Save and continue printing.
•
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit
•
the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
Install additional memory.
•
37 Insufficient memory to collate job
Try one or more of the following:
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
•
Cancel the current print job.
•
37 Insufficient memory, some Held Jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
Troubleshooting
260